Jacket
< style="margin: 0px 0px 10px; padding: 0px; font-size: 30px; line-height: 30px; font-weight: normal; color: rgb(51, 51, 51); font-family: Arial, Tahoma, Verdana, sans-serif;">
The size 50-52
You will need: 700 g sectional dyed yarn (100% wool, 400 m/100 g), 100 g each of emerald and marsh yarn (70% wool, 30% acrylic, 400 m/100 g/400 m), needles No. 4, zipper , Brother knitting machine. R. - persons. p., out. R. - out. P.
Gum: alternately 2 persons., 2 out.
Pattern with braids: knit according to the scheme. In out. R. knit loops according to the pattern. Repeat from 1st to 4th p.
Knitting density. Persons smooth surface, sectional dyeing yarn, knitting machine at a density of 5: 32 p. and 40 p. = 10 x 10 cm; pattern with braids, knitting needles No. 4, double swamp thread: 20 p. and 26 p. = 10 x 10 cm.
Back: include 176 needles in the work, analyze the needles for the elastic band 2 x 2 and tie with an elastic band 6 p. swamp thread and 40 p. sectional dyeing thread. Having knitted 46 p. by counter, reset the counter. Then knit faces. satin stitch. Having knitted 166 p. on the counter, for armholes, close on both sides in each 2nd p. 1 x 4 p., 1 x 3 p., 1 x 2 p. and 1 x 1 p. Having knitted 258 p. according to the counter, divide the work in half and knit both sides separately. To cut the neck close from the inner edge in every 2nd p. 1 x 15 p. and 3 x 5 p. At the same time, for shoulder bevels, close on both sides in each 2nd p. 4 x 12 p.
Left shelf: include 90 needles in the work and knit like 1/2 back. Having knitted 220 p. according to the counter, for the neckline, close on the right side in every 2nd p.
1 x 5 p., 4 x 3 p., 5 x 2 p. and 5 x 1 p. Run the bevel of the shoulder on the right side, as on the back.
Right shelf: knit symmetrically.
Sleeves: include 88 needles in the work, analyze the needles for the elastic band 2 x 2 and tie with an elastic band 6 p. swamp thread and 40 p. sectional dyeing thread. Having knitted 46 p. by counter, reset the counter. Then knit faces. stitch, adding sleeves for bevels on both sides in each 8th p. 12 x 1 p. = 128 p. Having knitted 174 p. according to the counter, reset the counter and knit the sleeves in short rows. To do this, on both sides in each 2nd p. push into the PNP from the opposite side of the carriage 1 time 5 needles, 1 time 4 needles, 2 times 3 needles, 20 times 2 needles. Then put all the needles into work and close all the loops with a pigtail.
Collar: include 170 needles in the work, analyze the needles for the elastic band 2 x 2 and tie with an elastic band 54 p. swamp thread and 44 p. sectional dyeing thread.
Remove open loops.
Pocket: on the knitting needles with a double swamp thread, dial 50 p. And knit with a pattern with braids. After 44 p. from the typesetting edge, tie 5 p. elastic band and close the loops.
decorative elements: for the first decorative element on the knitting needles with a double emerald thread, dial 41 sts and knit with a pattern with braids (= rapport 1). After 44 p. close all loops from the set edge. For the second and 3rd decorative element, cast on 41 sts on the knitting needles with a double swamp thread and knit with a pattern with braids (= rapport 2). After 44 p. close all loops from the set edge.
Assembly: perform shoulder seams; sew in the sleeves, complete the side seams and the seams of the sleeves. Sew a pocket on the right shelf. Sew decorative elements on the left shelf. Remove open loops.
Sew the collar on the wrong side with the part connected with the swamp thread. Sew a zipper on the front side. Turn the collar to the front side and pin it to the neckline. With swamp thread, tie 2 strips. To do this, include 192 needles in the work, analyze the needles for the 2x2 elastic band and tie 8 p. rubber band. Remove open loops. Sew straps over the zipper. 
Sweater size 52-54.
Snood size 35 x 80 cm.
You will need
- For a sweater: 400 g gray, 100 g each white and black yarn (40% alpaca, 60% wool, 100 g / 300 m).
- For snood: 300 g of fancy yarn (50% alpaca, 50% acrylic, 100 g / 250 m);
- knitting needles No. 4.5.
For a sweater: front surface, elastic band 2/2, pattern according to scheme 1.
For snood: pattern according to scheme 2.
Machine test:
For a sweater: 32 p. x 37 p. = 10 x 10 cm, knitted with front stitch on a Brother knitting machine at a density of 8.
For snood: 19 p. x 22 p. = 10 x 10 cm.
Attention! The sweater is knitted on a Brother knitting machine on a density of 8.
Description of knitting a men's sweater with an ornament
Back
Turn on 204 needles, work out the loops on two needle beds for elastic and knit 2 rows of black yarn and 34 rows of gray yarn on a density of 5/5. reset the counter. Slip stitches from front to back and work in stockinette stitch for gauge 8. After knitting 114 rows according to the counter, knit as follows: * 2 rows of white yarn, 2 rows of black, 2 rows of white. 4 rows in gray, 6 rows in black, 4 rows in gray, 2 rows in white, 2 rows in black, 2 rows in white, 34 rows in pattern, 2 rows in white, 2 rows in black, 2 rows in white, 4 rows in grey. 6 rows black. 4 rows of gray. 2 rows of white yarn, 2 rows of black, 2 rows of white, then knit to the end of the part with gray yarn *. At the same time, having knitted 150 rows according to the counter, for armholes, close on both sides in each 2nd row 2 times 3 p., 3 times 2 p., 6 times 1 p., Then in each 4th row 2 times 1 p each. Having knitted 226 rows according to the counter, divide the work in half and knit both halves separately, closing for the neckline in each 2nd row 1 time 9 p., 1 time 6 p., 1 time 5 p., 2 times 3 p., 1 time 2 p., 1 time 1 p. At the same time, knitting 228 rows according to the counter, for shoulder bevels, close in each 2nd row 6 times 8 p.
Before
Knit like a back. After knitting 210 rows according to the counter, divide the work in half and knit both halves separately, closing for the neckline in each 2nd row 1 time 8 p., 1 time 5 p., 1 time 4 p., 2 times 3 p., 1 time 2 p., 3 times 1 p. Shoulder bevels perform the same as on the back.
Left sleeve
Turn on 80 needles, work out the loops on two needle beds for elastic and knit 2 rows of black and 34 rows of gray yarn on a density of 5/5, reset the counter. Transfer the loops from the front to the back and knit at a density of 8 with front stitch, adding for the bevels of the sleeves on both sides in each 7th row 20 times 1 p. After knitting 114 rows according to the counter, knit as a section of the back from * to *.
After knitting 150 rows according to the counter, for an okat, close on both sides in each 2nd row 2 times 3 p., 1 time 2 p., In each 4th row 4 times 1 p., In each 2nd row 20 times 1 p., 1 time 2 p., 2 times 3 p. and 1 time 12 p. After knitting 220 rows according to the counter, close the remaining loops.
Right sleeve
Knit like a left hand.
Collar
Turn on 204 needles, work out the loops on two needle beds for elastic and knit 2 rows of black and 78 rows of gray yarn on a density of 5/5, reset the counter. Work in sts on 2 pocket needle beds and work 6 more rows in stockinette stitch, ending with waste yarn.
Assembly
Steam the details. Sew shoulder seams. Kettle the collar by inserting the edge of the neckline into the collar pocket.
Sew on the sleeves. Sew side seams and sleeve seams.
Description of knitting snood
Type 67 sts on the needles and knit 350 rows with a pattern according to scheme 2, close the loops. Run a seam.
A men's sweater on a knitting machine always looks very nice. Smooth loops and even pattern. This is a very fashionable and warm product. Masters often choose rough drawings for this option. For example, large braids or voluminous patterns. Everything to visually emphasize the shoulders and wide torso. Let's figure out how to knit a sweater on a knitting machine for a beloved man.
Not only the master, but also high-quality yarn will help to make a beautiful product. Using the wrong typewriter thread is a big risk. At any moment, the thread can simply break, and the canvas will be damaged. There will be tightened threads and a damaged pattern. That's why yarn should be selected specifically for a knitting machine.
These are special bobbins, knitting with which will not make it difficult even for a beginner..
Pay attention to the composition of the thread; for a warm winter sweater, you should use yarn with a high content of wool. But a lighter model may consist of threads with acrylic or other synthetic fiber.
How to knit a men's sweater (jumper) on a knitting machine?
Knitting a sweater on a typewriter will always be faster, but a beginner will have to study a little literature in order to master the technique of controlling the typewriter. In the very first stages, you will need to understand how to fulfill the required width of the set of loops. In principle, it is not much different from knitting by hand.
Initially, you need to make two parts of the sleeve separately. Separately knit the fabric of the front part and the fabric of the back part. Assembly is most often carried out with a needle and thread on your own. But the main advantage of machine knitting will be the speed of execution. Even loops are also used by many craftsmen to be considered a great advantage of using the machine method.
Men's sweater on a knitting machine with pigtails
original the model of a men's sweater includes several techniques at once. This is a pearl pattern and pigtails on a knitting machine. To highlight the pigtails and the collar of this model, a thread of a different color was used. It turns out a very original product.
To work use:
- knitting machine;
- yarn for knitting machine light brown;
- white.
measurements
Take a few measurements to complete the product.
To do this, you need to measure:
- shoulder width;
- arm length from the shoulder with an allowance of 2 cm;
- the length of the product from the shoulders to the elastic band;
- measure the length from the elastic band to the beginning of the armhole line.
Sample
Using a simple pearl pattern, which is used for most of the sweater, you need to tie a small square in width. Further, on this canvas of pearl gum, count how much the knitting density turned out - the number of loops horizontally and vertically.
These two indicators are the knitting density, and then the whole product will need to be compiled using them. How many loops are needed for the set of loops under the sleeves, and how many to use for the back and front shelf.
Pattern pearl gum
Sleeves
For the sleeve, you must first complete the pattern of pearl gum. Pay attention that the sleeve itself in this case starts from top to bottom. Knit the required length and make small decreases along the edges of the sleeve. Dec 2 sts every 10th row (one on each side). Next, knit with a 2 * 2 elastic band from a special punched card 6 rows. Do the same with the second part.
Back
The back is knitted from the bottom of the product and starts from an elastic band 2 * 2 and consists of 6 rows. Then knit the fabric without increases and decreases to the line of the beginning of the neck. For her, make smooth decreases. You can also use a punch card for this. Knit to desired length and finish knitting.
Before
For the front part, it is necessary to knit a similar part, but reduce the canvas by 1/4. Reduce from the right edge and there will be pigtails in this place, which will also be made using a knitting machine.
pigtails
For braids, use a fabric with pigtails, for this, dial only 1/4 of the entire set of the front part and knit along the length of the entire shelf.
Patterns "pigtails" for a sweater
Assembly
First, attach the pigtails to the unfinished part of the front shelf. Next, connect the front and back parts in the places of the shoulder seams, and all that remains is to sew in the sleeves, and make the side seams, both along the sleeves and on the sides. It remains to make a collar for a sweater, for it use elastic bands 2 * 2 from a punched card. The collar is made with white yarn.
So a beautiful sweater for a man on a knitting machine is ready.
It is very convenient to work with a knitting machine. With it, you can easily get a product in just one evening, when knitting by hand takes about a week for a huge product. Many masters are so accustomed to such machines that they are not ready to exchange them for ordinary knitting. You can make a beautiful thing without a single miss with knitting machines. To all masters and all beginners, inspiration and good luck in mastering a new craft.
Some examples of male models knitted by car for inspiration and repetition. It is clear that it is almost impossible to repeat one to one.
A difference in the type or thickness of the yarn will already make a significant difference. The same model knitted from different thicknesses of yarn will look like two different things. Not worse or better, just different.
Since handwork is unique, knitting sweaters for men is not only a rational activity. These are protective things, especially if they are tied with loving hands for beloved men.
Among the weaves that can be applied to men's jumpers on a knitting machine, there is an incredible variety of options. Even hand drawing, loop embroidery or color transition on a refocal card will give original options.
But the most important thing is the pattern on which you will knit a jumper on the machine. They can be taken from Burda or from ready-made descriptions of knitting.
In the same way, your favorite things will go, which do not even have to be ripped apart. Knitwear is plastic and will allow you to accurately fit the thing on the figure.
Take an idea, a pattern, fit it to the figure of a particular person and do not forget that you your own loop test will be required. No machine, even if you take the threads indicated in the description, will give exactly the same density. There are bound to be discrepancies. As a result, the thing will need to be bandaged. And nobody needs it.
Ideas for men that can be knitted on knitting machines are in the air. They can be taken from knitting magazines, peeped on colleagues or in shop windows. Create with pleasure.
Hello girls.
I knitted a birthday present for my husband, they asked for a warm, plump, embossed one.
I was too lazy to weave braids, for a long time I wanted to try embossed knitting according to jacquard patterns, I tried patterns that are clearly visible, by the way, one of them is a pattern for a robot, I had to think about how to separate the patterns among themselves, the idea was submitted by Natasha (SilverRainOzersk). Thanks again Natasha, I divided it with rollers. I want to say that it’s hard to knit rollers for a double-fanture machine, the carriage wedged on the samples, I found a detailed description on the craftswoman forum
On machines of the Breizer-Silver type, it is difficult to perform large volumetric rollers; As much as possible, you can knit up to 6 rows on one needle bed, and then you have to cheat .. In principle, you can knit more, but you have to cheat even more to make it work. So..they can separate both stripes and jacquard, it looks beautiful.1. Small roller - 2 rows. We knit without any problems on ZI and PI at the p / card machine; the electronic one does not have XX in both directions on the ZK, so there are two options: either we shift the "stubs" of the side levers when moving from right to left so that the needles do not knit, but this is tedious, or the pattern should be programmed in the program for this case: S-J - without selection and use as needed.
2. Medium roller - 4 rows. Carriages are knitted without problems on both ZI and PI, acc. with machine model (description above).
3. Roller - 6 rows. After the first 2 rows, be sure to hang both side 7-shaped hooks with small weights. After 4 rows, so that the loops on the working needle bed are well knitted, we forcibly put them in the PRP (P-carriage, selective ruler, etc.).
4. Large roller - more than 6 rows. In this case, we act according to clause 3, but it is still desirable to use some suitable tool (the decker is not suitable) after the 5-6th row, carry out from above between the needle beds so as to push the accumulated fabric down and be sure to set the needles in the PRP before each pass of the carriage .All this applies to ordinary rollers on two fontures, since on one fonture the rollers are made any and a little differently, and the patterns of "decorative" rollers have already included up to 6 rows maximum. Only Passup can perform patterns with voluminous complex rollers, because it does not have a web stretch and a slightly different technology.
as for the embossed jacquard, maybe someone does not know, I give a description from the magazine Lubo Delo
p0057.png
p0058.png
Double knitting, thread Belarusian p\w in three threads. turned out warm, plump. Rolls six passes. 
0_a2172_8afb44b2_L.jpg
The photos are not good, the fotik does not want to take photos normally 