How to clean silver with foil and soda? Is it possible to clean silver with soda and foil and how to do it correctly: step-by-step instructions with solution recipes How to clean silver with foil

From time immemorial, jewelry has been designed to evoke in others emotions that are favorable for the person being decorated. After all, you must admit, it is pleasant for a person to look at clean, shiny jewelry. Therefore, it is necessary to properly store, sometimes clean to maintain a beautiful appearance of the decoration. Silver is one of the favorite materials for making jewelry, because it looks beautiful and is inexpensive. But since this metal has a very characteristic, not at all pleasant, feature of darkening over time, a lot of ways to clean it have been tested in practice. Cleaning silver at home with foil and soda is one of the most effective, simple, and therefore popular. About him and other options for funds will be discussed in this article.

Why do jewelry deteriorate?

From time to time, silver becomes dull, one of the possible reasons is an increased level of humidity. The metal is also affected by contact with human skin:

Moisture;
Cosmetics with sulfur;
Features of human sweat.

In order to know how to clean silver at home, we must analyze the types of this metal:

sterling;
monetary;
nielloed;
matte;
filigree.

Important! There is no need to clean filigree, blackened types of metal!

It is necessary to take into account the presence of additional elements. You should be careful if the inlay contains:

corals;
amber;
pearl.

Silver Cleaning Methods

The following describes how to clean silverware and dishes. Each proposed method is simple and does not require much effort from you. The effect is usually noticeable almost immediately.

Soak:

The first and one of the main actions is to wash the metal in a thick solution of detergent.
For the best effect, bring the solution to 50 C, soak appliances or jewelry for 30 minutes.
After this, we wash everything soaked with a sponge.

Cleaning silver at home with foil and soda:

A solution of salt, soda, detergent

We need aluminum utensils:

We collect water in it, add detergent (liquid).
Next, add salt, soda.
Boil our decorations over low heat for 30 minutes.

Tooth powder, ammonia, soda:

All ingredients are mixed.
The mixture is applied to the silver with a soft brush and then washed off with water.
In conclusion, it is necessary to dry the products well and polish them.

Solution for products with stones and other elements:

We take: water, shavings of laundry soap, ammonia.
Bring the solution of these substances to a boil.
After it cools, apply to any silverware with a toothbrush.

Important! Hard-to-reach places can be cleaned with ear sticks.

Another solution for simple products without stones:

We heat citric acid or ammonia to enhance the effect. You can also grate potatoes, and then pour water.
We lower the products into the selected product for a couple of minutes.
After we take wool and three to a shining shine.

Clean silverware and cutlery separately from other household items to avoid scratches and damage to coatings.
When cleaning and washing silver, do not use rubber gloves, because they can cause microcracks.
It is advisable to give products with French or oxidized metal to professionals.
You should not go too far with cleaning silver, as you can tear off the decorative coating, for example, mistaking it for plaque.

How to properly store silver?

It is advisable to store silver separately from other metals - in caskets or velvet bags. If they are not available, then you can use plastic bags, the main thing is that they do not scratch each other!

The following materials must not be used for storage:

paper packaging;
Cardboard;
Viscose silk.

Important! Such packages contain sulfur, which provokes the darkening of silver.

Also, the storage location should not be damp places, direct sunlight and high temperatures.

serviceyard.net

How to clean silver with baking soda and foil?

The easiest and safest way to clean silver jewelry and cutlery is to clean silver with baking soda and foil. The foil is necessary in order to prevent the metal oxidation reaction during boiling in a metal container.

For cleaning, ordinary food foil is suitable, it must be laid so that it completely covers the bottom and edges of the pan:

Put a piece of foil in a metal pan, draw 0.5 liters. hot water. Add 2 tbsp. baking soda, mix thoroughly and put on fire.
When the solution boils, dip the jewelry into boiling water.
Hold the products for 5-10 minutes, do not boil longer - this can damage the coating of the jewelry.

Cleaning silver with baking soda and salt

After boiling, remove the jewelry, rinse it with running water and dry it with a soft, lint-free cloth. If the dirt has not gone away, use an ordinary toothbrush with soft bristles to clean the blackness, gently rubbing the contaminated areas.

In the next article, we will talk about cleaning gold at home with baking soda.

Cleaning silver with baking soda and salt

If after the soda "bath" the pollution has not gone away, you can try to bleach the "jewelry" in this way:

Prepare a saucepan with a piece of foil, pour a solution of 0.5 l into it. warm water, 2 tbsp. soda, 1 tsp salt and 50 gr. any detergent you use to wash dishes.
Dip the jewelry in the solution, leave it on low heat until it boils.
Soak the products for 3-5 minutes, then rinse with plenty of water.
After cleaning, dry the product thoroughly with a soft cloth.

Cleaning silver with soda and salt is an effective method that allows you to carefully remove almost any contamination.

Remember - silver jewelry with glued stones cannot be boiled. When boiling, the glue will dissolve, and pebbles or rhinestones will fall out.

How to clean silver with baking soda and vinegar?

To clean silver with baking soda and vinegar you will need 6% acetic acid, baking soda and water:

Line a glass container with aluminum foil. Pour in 100 ml. 6% vinegar essence, 1 tbsp. soda powder and 1 tsp. table salt. Mix everything with a wooden spatula, then lower the decorations into the bowl.
Cover and leave for 10 min. A change in the color of the water will indicate the cleaning process.
After cleaning, rinse and polish the products.

This method will help you quickly remove bluish or greenish deposits from your favorite jewelry or cutlery, resulting from the oxidation of silver.

Cleaning silver with peroxide and soda

The peroxide and soda cleaning method is only suitable for all-silver items. If the jewelry consists of an alloy of metals or has an additional coating, peroxide cannot be used.

To prepare a cleaning solution:

In a deep glass container, mix 3% peroxide solution and ethyl alcohol in equal proportions.
Add 1 tsp to the solution. soda powder, stir.
Dip jewelry into the solution for 15-20 minutes, silver cutlery - for 60 minutes.

Soda and toothpaste

An ordinary toothpaste and a brush with soft bristles will help to effectively clean silver items:

Mix water, ammonia and toothpaste in a ratio of 5:2:2.
Dip the brush into the mixture and gently rub the product.
Then rinse with water and dry with a soft cloth. It is best to use soft, lint-free cloths.

Soda and ammonia

Jewelry can also be cleaned with ammonia. To do this, you will need to prepare an alcohol solution by diluting it in 1 liter. water 2 tbsp. l. ammonia. The decoration is immersed in the solution for 15 minutes, then washed and wiped with any soft cloth.

When working with ammonia or acetic acid, take precautions - try to ventilate the room, use rubber gloves and avoid getting caustic substances on the skin or mucous membranes.

Do not use acids when cleaning radiated silver. If you want to clean such a product, use more gentle methods, without the use of acetic acid, ammonia or hydrogen peroxide.

The video shows the most popular method for cleaning silver jewelry.

supersoda.ru

Reasons why products lose their appearance

Silver can tarnish over time. The main reason for this unpleasant phenomenon is the increased humidity of the room. Can ruin the appearance of metal and constant contact with human skin. When in contact with sulfur, a reaction occurs, which just leads to such consequences. Therefore, all products containing sulfur must be kept away from silver.

When cleaning products with some inserts of precious and semi-precious stones, you should be especially careful. Namely, it is better not to clean products containing:

pearl;
amber;
corals.

Such elements are very sensitive to chemistry and mechanical stress, if handled incorrectly, they can easily be damaged. The most effective for cleaning silver are products that can be bought in stores. However, if this is not possible, folk methods are also suitable.

Cleaning with improvised means

How to clean silver with baking soda and foil? For this method of cleaning silver items at home, you will need:

a pot for filling with water;
baking soda, two glasses;
a quarter cup of salt;
soft cloth;
tooth cheek with soft bristles;
aluminium foil.

The process itself will look like this:

Line the bottom of the pan with aluminum foil, it should completely cover the bottom.
The walls can not be covered with foil, provided that the silver item does not touch them.

Take water in a saucepan. Water should not boil, somewhere around 60-80 degrees. It is enough to pour, just so that it completely covers the product.
Add the baking soda and salt mixture, mixing thoroughly.
Leave the product to be cleaned in the solution for 5-10 minutes.
After this time, remove the product and remove the remaining plaque and dirt with a toothbrush.
Rinse the jewelry with cold water and dry with a lint-free cloth.
Your decoration has been cleansed.

The amount of ingredients added to the solution, soda and salt, will depend on the size of the product to be cleaned. In addition, more of these components should be added if the product is too dirty.

If your jewelry has not yet become heavily soiled, then it can be quickly cleaned with a soapy solution. How to clean silver in this way? After soaking the jewelry in such a solution for a while, simply brush them with a toothbrush, gently pressing.

A product without stones can be lightened with ammonia or citric acid. To enhance the effect, the solution is heated.

You can wash silverware in potato broth. Just drop the thing in there for a few minutes and get it out. Use wool for wiping and polishing.

Jewelry is usually worn to attract attention. You will also attract him with blackened silver, but only in a bad sense of the word. Cleaning such a product at home is not only possible, but also quite easy.

dedpodaril.com

Why silver tarnishes

All silver coins tarnish, whether they are sterling silver or silver plated. Tarnishing occurs because silver reacts chemically with sulfur in the air to form silver sulfide.

The combination of aluminum, soda, salt and hot water changes the properties of the chemical reaction, which allows you to remove silver sulfide from its surface. Cleaning silver with foil can be a fun process to brighten up the weekend with your kids. Not only will you be able to teach a science lesson on your own, you will also receive pure silver as a result.

Silver Cleaning Tools

To clean silver with aluminum foil, you will need the following materials:

Silver to be cleaned
A saucepan or plate deep enough to fill with hot water and cover the silverware.
2 cups baking soda
About a quarter cup of salt
Toothbrush with soft bristles
Soft, lint-free cloth

Cleaning process

Line the pot or plate with aluminum foil, making sure it covers the bottom of the container completely. Also, make sure that the sides of the pot/plate are also lined with aluminum foil if the silverware comes into contact with them.

Pour enough hot (but not boiling) water into a saucepan to cover the dirty silverware. Add soda and salt, stir evenly throughout the container. If you want, you can rotate the pan around its axis to mix the baking soda and salt, but this decision is not really necessary.

The chemical reaction will occur regardless of the quality of dissolution of the ingredients in water. Leave the silver in the water for 5-10 minutes. Once the soak is complete, remove the silver item from the pot/dish and gently scrub it with a soft bristle toothbrush to remove any sulfate residue and dirt that has not been washed off before. Rinse with cold water and wipe dry with a lint-free cloth.

Consistency adjustment

Please note that the amount of baking soda and salt you add to the water container will depend on the size and quantity (volume) of the silver item to be cleaned.

For example, if you're going to clean one tiny, silver spoon you bought on a weekend wine tour in Napa, you can use 1/4 cup baking soda and a tablespoon of salt.

Start with a little baking soda and salt to clean your silver with baking soda and foil. You can always add more if soaking doesn't work.

meclean.ru

Causes of the problem

Over time, silver things fade, black spots appear on them. There are several reasons for the loss of initial attractiveness:

increased humidity of the environment;
cosmetic products containing sulfur;
excretion of sweat by a person.

Although silver is resistant to acids, it is highly responsive to the effects of hydrogen sulfide found in the air. If sulfur-containing cosmetics get on the surface, black spots appear. Human sweat secretions have the same effect on this metal, and an excess of nitrogen in the body causes it to darken. This information has been proven by scientists during experiments.

Preparatory stage

Before cleaning silver, a number of preparatory procedures are required. It must be rid of the top layer of contamination, degrease the surface. For this, ordinary detergent is perfect. For best results, use brushes or hard sponges.

When any additions are used in the jewelry, in addition to metal, for example, coral, amber inserts or pearls, it is not recommended to clean it yourself.

A well-washed metal surface reacts better with a soda solution. Since silver is a very soft metal, cleaning too vigorously can damage its surface, leaving scratches. Do not forget that when cleaning the surface with spraying, you need to be extremely careful. If overdone, the coating can be completely removed.

Silver will be completely restored due to the ability of aluminum foil to react with silver sulfide

It is strictly forbidden to clean things with sharp objects, even in hard-to-reach places. This method can ruin your favorite thing.

Get rid of stains and dirt

Specialized tools will help to update silver jewelry. You can buy such substances in jewelry stores, household departments of supermarkets. But they are adequately replaced by folk methods.

One of the effective folk recipes is cleaning silver with soda and foil. The method is quite fast, simple and does not require special financial costs, because all the components can be found at home.

To prepare the product, you need to dissolve two tablespoons of baking soda in half a liter of water. Bring the resulting mixture to a boil. Add a small piece of foil to boiling water. Then place in the product solution. Keep them for a few minutes, gently stirring with a wooden stick. At the final stage, remove the decorations with a fork, rinse well under running water. If desired, you can polish them with a soft cloth. After such a procedure, the cleaned products will be like new - clean and sparkling.

The second method differs slightly. In an aluminum bowl of water, add equal parts baking soda and salt, as well as a small amount of detergent with liquid texture soap. In this mixture, it is necessary to boil the products for half an hour.

When silver cutlery turns black, with the help of improvised means they can be saved. Take a deep bowl, spread foil on its bottom, spread the forks and spoons evenly. Sprinkle 3 tablespoons baking soda on top and cover with foil. Then pour enough boiled water into the bowl so that it covers the entire structure. After twenty minutes, the devices must be removed, rinsed with cold water. This procedure will clean their surfaces from plaque and stubborn dirt.

Remember to thoroughly dry and wipe the silver after the cleaning procedure.

There is another method for cleaning silver, it is considered one of the most effective. It will require sodium bicarbonate and tooth powder. To prepare a solution, mix these components, add ammonia. It is recommended to clean jewelry with this mixture using a soft brush, you can use an old toothbrush. After the procedure, rinse everything under running water.

Do not forget that not every piece of jewelry can be succumbed to the silver cleaning procedure. Black and filigree things will deteriorate in the process. Since blackness gives the product a special sophistication, it would not be the best solution to get rid of it.

Solution for products with stone

To update the appearance of products with inserts, it is necessary to use more gentle methods. On sale there are special solutions that do not harm the decoration. In addition, such substances create a protective shell. But their price will not greatly please thrifty housewives. Moreover, in the archive of folk methods there are analogues to such means that clean silver with soda.

grated laundry soap;
a glass of plain water;
a few drops of ammonia.

Mix all the ingredients together, bring to a boil. After the mixture has cooled, brush the rings or earrings with it using a soft brush. Black plaque around the stone is easily removed with a cotton swab dipped in this solution. At the end of the process, rinse the products with water.

sodalab.ru

Why does silver darken?

Silver is a type of metal that tends to tarnish, darken, and this may be due to time.

But on the other hand, moisture and contact with human skin can serve as a cause. To avoid the process of darkening and tarnishing of silver, it is important to know all the reasons for this action. And also how to clean it. If the silver chain has darkened around the neck, the reasons can be identified here.

Reasons for blackening silver:

high humidity;
sulfur, which is contained in cosmetics;
features of human sweat.

Many have noticed more than once how silver turned black on the human body or in humid air. The metal is resistant to acids and alkalis, but not to hydrogen sulfide.

For proper cleaning, it is imperative to know and take into account the alloy of the product.. It can be sterling, mint, matte, filigree and blackened. When cleaning, do not forget about additional elements and stones.

Be careful with amber, pearls and coral. If there are precious stones in jewelry, then it is better to give the product for professional cleaning. Please note that exposure to chemicals and acidic agents will adversely affect the stones and you will ruin the product.

Jewelers are an effective and reliable way to clean silver metals. Take the product to the master, he will quickly clean it. You can also use special professional tools that can be purchased at a jewelry store. Do it with a professional cleaner. But these methods are not always feasible, so proven and simple methods will come to the rescue.

Silver cleaning with foil

Soda is considered the simplest and most effective way to clean silver from black plaque.. To prepare the product, you will need 500 ml of water and 2 tsp. soda. Mix well, put the liquid on fire, bring to a boil. Pour the solution into a container, on one of which put the foil. Dip the product in the liquid. Hold the silver for a few minutes and again you can see how the silver becomes sparkling and clean.

You can clean silver cutlery with baking soda. To do this, put all the devices in a bowl, on the bottom of which put the foil. Cover appliances with soda, you will need about 3 tbsp. l. soda. Pour hot water over everything, but not boiling water. Leave for a quarter of an hour, then rinse each device under running water. This is the easiest and most effective way to clean cutlery at home.
You need a container with a wide bottom. Wrap the container with foil, put silver in one layer. Sprinkle salt, soda on top, add a few drops of liquid soap. Cover the cutlery with foil and pour boiling water over. Leave for 15 minutes.
Potato broth and foil will help clean silver. Everyone prepares mashed potatoes, and the liquid in which the vegetable was boiled is drained. Should not be doing that. Drain the broth into a container, put a piece of foil and lower the silver item. Get the jewel in five minutes. At first glance, this method seems simple, but effective and simple.

Other folk recipes for cleaning silver

Let's prepare another remedy based on soda. You will need a container (preferably aluminum) into which to pour water, about a glass. Add 0.5 tsp to water. salt, ¼ tsp. soda and 0.5 tsp. detergent.

Put the liquid on fire. As soon as it boils, put the silver item into the water. Boil 30 minutes.

Cleansing with citric acid. To prepare the solution, you will need a glass of water and 50 grams of citric acid. acidic liquid is poured into an enameled container and placed in a water bath.

Place the products in liquid and boil for 15 minutes, check the degree of cleaning all the time.

Heavily soiled items can be boiled for up to 30 minutes. It is recommended to put a small piece of copper wire into the lemon liquid. If the house has gold jewelry, how to clean gold with stones at home, you can find out here.

Vinegar will help rid silver of black spots. For cleaning, you will need table vinegar (as for preservation), which is poured into an enameled bowl. Vinegar is recommended to be heated over low heat, jewelry should be lowered into a warm liquid.

The duration of the remedy is 15 minutes. Remove the silver, rinse with water and wipe dry with a cotton cloth.

Ammonia. Dip the product in 10% alcohol for a quarter of an hour. Then rinse with water and dry. Please note that if the product is with stones, then there should be five drops of ammonia in a glass of water.
Try cleaning with Coke. Pour a small amount of drink into a ladle, put on fire. Put the product in boiling water. Withstand five minutes, this method will get rid of darkening.

Mechanical cleaning of silver

To clean silver items, you can use a solution based on toothpowder. To prepare the solution, you will need tooth powder and soda in equal proportions, add ammonia so that you get a mushy mixture. It is applied from the product with a toothbrush, rinse off with cool water.
A stationery eraser will cope with black on silver. Take the jewelry and slowly, slowly, gently rub the silver with an eraser. This method will give the product a shine. The method is suitable for rings. It will be impossible to clear the circuit.

Cleaning silver jewelry with stones

For cleaning all jewelry, special cleaning compounds have long been invented. They not only clean the metal, but also create a protective film on it. It is not always possible to buy a product, because you need to know where it is sold.

And it happens that you need to clean silver here and now. Therefore, proven methods and ingredients come to the rescue. All products with stones are best cleaned by specialists, but you can also at home. Let's prepare a solution.

It will take 100 ml of water, laundry soap shavings 1 tbsp. l., 1 tsp. ammonia. Mix all ingredients and bring to a boil. The prepared mixture is rubbed with silver. Carefully remove blackness and darkening near the stone with a cotton swab dipped in alcohol.

How to care for silver?

Like all jewelry, silver is no exception, it can lose its luster. To prevent this from happening, he needs constant care.

For cleaning, use a soft cloth and non-aggressive products.

You can remove dark deposits from the surface of the product using ordinary soapy water or a napkin soaked in ammonia. After any cleaning, be sure to rinse the product with water and dry.

Remember that there are several types of silver, some jewelry with a decorative coating that is not cleaned.

A feature of silver is that over the years it can only get prettier, but this is subject to constant wear. By nature, metal is very vulnerable. Therefore, contact with air, in which a high content of hydrogen sulfide can lead to a loss of gloss and the formation of a dark coating.

How to wear silver?

To avoid having to clean your jewelry, start wearing it correctly.

Wearing silver jewelry is a must. The longer you wear it, the better the metal looks.
It is necessary to remove jewelry before using medicines and especially ointments.
When wearing silver metal, it is worth refusing to use cosmetics that contain sulfur. The metal may darken.
When doing homework, be sure to remove your favorite decoration. Since it is more likely to damage it.

After each wearing of silver, wipe it with a dry soft cloth. Remove moisture and sweat in time. For storage, choose a dry place, protected from the sun. Keep silver separate from gold. If you wear gold jewelry, they also need to be cleaned. How to clean gold jewelry at home, read here.

nisorinki.com

How to clean silver from blackness quickly and effectively at home

Cleaning jewelry consists of four simple steps:

It is necessary to wash the product in warm soapy water (you should use ordinary soap or liquid, shampoo, dishwashing detergent).
Clean with any of the methods below.
Rinse thoroughly in clean water, dry.
Rub it well with a soft cloth (microfiber, flannel, a piece of suede), achieving a bright shine.

Get your jewelry a separate, must-have used (it has softer bristles) toothbrush. With its help, it will be possible to remove dirt from the most inaccessible places.

Let your silver pleases the eye and decorates you for a long time!

Ammonia to help

The most popular and effective home remedy for cleaning silver products from blackness is ammonia. Be sure to keep a bottle in stock if you are a lover of chains, rings and earrings.

You need to prepare a solution of two tablespoons of alcohol per liter of pure water. Want to achieve an even stronger effect? You can pour a little detergent and hydrogen peroxide into the mixture. Next, the jewelry should be placed in the liquid, wait 15 minutes, remove and wipe with a soft cloth with a pile.

Cleaning with alcohol, salt, soda

Another version of the recipe: per liter of water, two large spoons of alcohol and peroxide. Jewelry should take a bath for about 15 minutes. Then place in clean water, dry and polish.

The next helpers in the fight against pollution are salt and soda.
Take half a liter of water, pour a couple of tablespoons of soda. Bring the solution to a boil, remove from the heat and submerge the decorations in the liquid along with a small piece of plain food foil. Wait 10-15 minutes and you will be amazed at how shiny and beautiful your clothes have become.

You can do the same trick with salt. It will take 2-3 teaspoons per half liter of water. In this case, the jewelry must either be soaked for a couple of hours, or boiled for 10-15 minutes.

Recipe with foil - clean silver in a couple of minutes

Take half a glass of boiling water, add half a glass of table vinegar.
Lay a piece of foil in a bowl at the bottom, pour in a tablespoon of salt and soda.
Then the dry components must be poured with the prepared liquid.
Place the decorations in the solution so that their contact is maximum with the foil.

This is a quick way to clean jewelry, it will take less than 5 minutes. It is effective with old silver.

Another variation of the recipe.

Take a bowl, lay a piece of food foil inside it, wrap the excess around the edges. You should get such a plate of foil in a plate.
At the bottom of the container, fold the jewelry (chain with a cross, bracelets, rings, earrings).
Sprinkle dry baking soda powder on top. Do not be stingy, jewelry should be well covered with it.
Next, take a kettle of boiling water and pour water on the soda. Wait for the violent reaction to end.
Take out the decoration with a spoon, rinse in clean water. Now, most likely, there will be a strong reaction from your side (admired, of course).

Only a couple of minutes - and things are like from a store, you don’t even need to rub anything. It is convenient to clean silver cutlery in this way, especially when there are a lot of them.

An important caveat: do not use this recipe with blackened silver, all decorative black can come off the jewelry.

By the way, if you have jewelry that you rarely wear, store them wrapped in food foil, they will stay clean for a long time.

Detergent, acid to shine

An effective way, according to reviews, is a solution of salt, soda and dishwashing detergent (per liter of water, a tablespoon of detergent, salt and soda).

Silver should be placed in an aluminum container, poured with a solution, boiled over low heat for 20-30 minutes. The process needs to be controlled, it may take less time.

According to people, this is the most effective way, jewelry after such cleaning shines like new.

Another option is with soda. Mix it with water until you get a paste. Rub the resulting paste on the jewelry with a toothbrush, then bathe thoroughly in clean water.

Important nuance: not suitable for matte and smooth products, scratches may appear.

Every home has a sachet of citric acid. A useful household item. It is also good for cleaning silver.

Take 100 grams of lemon, pour in half a liter of water, place the container in a water bath.
Then put your jewelry into the solution, but first they need to be strung on a piece of copper wire, the ends of which must be twisted together (the contact of silver and copper is the fundamental point of this method).
You need to boil for 15 to 30 minutes.
Then rinse well.

6% vinegar will also help in the fight for cleanliness. It needs to be warmed up a little, dip a cloth in it and wipe the jewelry. Alternatively, soak items in the liquid for 15 minutes, then rinse and buff with a dry cloth.

When items are too dirty, more drastic methods are needed. Take toothpaste and an old brush. Or you can make a paste of water, ammonia and tooth powder (5:2:2).

Recipes with chalk

Another option is to mix crushed chalk with ammonia. Clean jewelry with paste, then rinse thoroughly with water. This method is especially suitable for chains.

You can also use regular toothpaste instead of toothpaste. Dip the product in it, and then thoroughly walk with a brush.

In this video you will see with your own eyes how the method works with tooth powder, soda and foil, as well as with peroxide and ammonia.

When things are too dirty, soak in pure ammonia, without dilution. You need to withstand 10-15 minutes. Do not throw jewelry unattended during this time, control the process. Do you see that the time has not yet run out, but things are already clean? Take them out, excess soaking is not recommended.

If suddenly you use Amway products, then their bleaching agent helps well. You need to pour boiling water over it and lower the jewelry into the solution for 5 minutes.

This advice also works. It is necessary to put jewelry (without stones) in a pocket of clothes, which is securely closed with a lock. Then put the item in the washing machine and wash as usual. According to the network users recommending this method, everything is washed very well and shines perfectly.

Folk remedies from a notebook

Several folk remedies. You will be surprised, but they also work well.

First option. Take the warm water in which the eggs were boiled, put decorations in it. Then wipe with a cloth.
Second option. Peel a few potatoes, put in a saucepan with water and silver there. After 3-4 hours, remove and rinse with water.
The third way. Add garlic husks to the water, decorations there, boil everything.
Fourth way. Boil silver with Coca-Cola.
Fifth way. Take an egg and separate the yolk, shake a little. Then separate a piece of cotton wool, soak with yolk and wipe the product. Leave it like this for a while. Then you need to thoroughly rinse and grate.

An ordinary white soft eraser also helps in the fight against blackness. In order not to be bored, try rubbing your jewelry while watching a fascinating movie. The result will surprise you.

With the help of special cosmetics

Do you for some reason do not trust home remedies? I can recommend you jewelry cosmetics. For example, Aladdin. It is made on the basis of ammonia, but does not have such an unpleasant odor.

Its advantage is that it is inexpensive, and suits not only silver, but also gold, as well as jewelry, even the most inexpensive. There are solutions, pastes and polishing wipes to choose from. Cleans cosmetics quickly, sold in jewelry stores, online stores.

A smooth ring is also suitable for regular lipstick. It is necessary to walk with a sponge on its surface and leave it in this form for several minutes. Then you need to take a woolen cloth, wipe the thing off the lipstick and carefully polish it.

Cleaning a stone ring

The choice of method strongly depends on what kind of stone your ring is decorated with.

Is the mineral dense (emerald, sapphire, aquamarine)? Any method will do. But it is better to give preference to ammonia with water.
Opal, malachite, turquoise, moonstone should not be rubbed with brushes and pastes, soda. These are not such dense stones, scratches can appear on them. Bathing in soapy water is acceptable.
Ruby, topaz and garnet do not like hot water, it can change the color of the stone, so the solution must be cool (soapy or with ammonia). Wipe the very surface of the stone with cotton wool moistened with an alcohol solution.

Pearls, amber, mother-of-pearl require careful treatment. They are afraid of any acids, alkalis, alcohol. Other than a soft damp cloth, nothing from home remedies is suitable for such decorations.

Even the water must be boiled, filtered, as chlorine can also damage the stones. Heavily soiled jewelry can be washed with soapy water, but only when the stone is not set on glue.

Read the recipe for a good stone jewelry cleaner.

Prepare water, laundry soap rubbed with shavings, and ammonia.
All you need to mix, put on fire and bring to a boil.
The warm mixture is collected with a toothbrush and the metal is cleaned. Near the stones you need to process with a cotton swab.

Cleaning gilded silver

This kind of jewelry should be handled carefully so as not to spoil the layer on the surface. Even mild abrasives will damage the jewelry.

It is permissible to wipe such products with a soft cloth, ideally with suede.

To remove greasy deposits, dust and stains, dip a cloth in alcohol or a weak solution of vinegar (2 tablespoons of 8% vinegar in a glass of water). Then you need to wipe the product dry and polish with suede.

You can soak gold-plated jewelry in beer for 30 minutes. Then rinse thoroughly in clean water and rub to a shine with a cloth.

Is the decoration too dirty? It is necessary to prepare a solution of warm water, soap and a few drops of ammonia (per liter of water a small spoonful of liquid soap, dishwashing detergent and 6 drops of alcohol).

You need to soak things for 30 minutes.

Cleaning enamel products

Enamels are contraindicated in contact with chlorine, acid and alkali. Thus, all detergents and cleaners are excluded. Damage to enamel and sudden changes in temperature.

It is permissible to wash such jewelry in cool water with a few drops of ammonia. Then the surface should be rubbed with a soft brush with a small amount of tooth powder.

Silver is a widely used metal, which is used not only in the manufacture of jewelry, but also in the production of cutlery and other household items. Outwardly, it looks no worse than gold, but much cheaper. But silver has one drawback - it quickly darkens, so we will look at how silver is cleaned with soda and foil separately and together.

The main reason for the darkening of silver is considered to be the impact of the environment, namely moisture, cosmetics, and human sweat, because they contain sulfur or hydrogen sulfide, which adversely affects silver products. In addition, excess nitrogen, which is in the human body and comes out through the sweat glands, also contributes to rapid darkening.

Thus, at some point, any silver jewelry can deteriorate. That's why it's important to know how to properly store and clean such items so as not to harm valuables.

Soda cleaning

Pour a liter of water into an aluminum bowl, add 20 gr. baking soda and salt, as well as a little dishwashing detergent. As soon as the solution boils, lower the silver items there and soak them there for 30 minutes.

You can wrap any container from the inside with foil, pour salt and soda in a tablespoon and pour a glass of boiling water. Dip silver jewelry into the composition and wait until the solution cools down. After that, the original shine will return.

The method of soda, toothpaste and liquid dish detergent (all ingredients must be taken in equal proportions) also does an excellent job. The resulting slurry rubs silver appliances. At the end of the procedure, it remains to rinse them with water and wipe dry.

If there are precious stones on the products, then try a composition of water, soap shavings and a few drops of ammonia. After bringing everything to a boil and letting it cool, process the silver with a cloth napkin. Hard-to-reach places can be rubbed with a cotton swab dipped in the same solution.

foil cleaning

Foil and potato broth will help clear the darkening on silver at home: pour the liquid that remains after boiling the potatoes into a container, put a piece of foil there. Dip a silver chain or any other product into the composition for 10-15 minutes. Then remove the jewel, rinse under water and dry.

In a solution of vinegar with water (1: 1), put a few sheets of foil, and then immerse the silver there. Leave for a few hours, then wipe the metal with a tissue.

You can clean silver jewelry or cutlery with citric acid with foil - the composition is also prepared, as in the vinegar recipe. After curing the products, be sure to rinse them and dry with a soft cloth.

Baking soda and foil

Now let's combine soda and silver cleaning foil: take 2 tablespoons of soda for half a liter of water, put the container on fire and bring to a boil. Next, put a few pieces of foil into the boiling solution and put all the silver items there. Just a few minutes of being in such a non-standard boiling composition, and the products will be as good as new.

You can clean silver with foil and soda with the addition of vinegar or citric acid. In this case, you don’t have to boil anything, it’s enough to make a remedy from a liter of water, a tablespoon of soda and 0.5 liters of vinegar or 1 tbsp. spoons of acid. We add pieces of foil there, and then fold all the silver items. After 5-6 hours, the objects will shine again, attracting attention.

Silver Care

Purification of silver with foil is due to the reaction between silver and aluminum sulfite. Moreover, in a cold aqueous solution, the processes take longer than in a warm one. But in order to carry out such procedures less often, you should learn how to properly care for silver items:

ensure storage in special boxes or places that protect from light and dust;
remove silver jewelry before applying cosmetics, showering and sleeping;
it is also important to clean the house without wearing silver rings, chains, etc.;
silver cutlery should be washed immediately and wiped dry;
if you have to store such items for a long time, wrap them in foil, it will become a protection from external influences.

Silver cleaning is a procedure that must be carried out regularly. Silver is widely used as a metal used in jewelry, and it looks just as good as gold. But this metal has one drawback - it must be cleaned regularly, as it enters into some chemical reactions, becomes covered with a dark coating. Of course, you can always take the jewelry to the workshop for cleaning, but if this is not possible now? There are many ways to clean this metal, one of them is cleaning silver with soda and foil.

Jewelery made of precious metals has long been in vogue as part of a person's everyday accessories. And just like clothes, they should be well-groomed. If the decoration is dull or covered with plaque, then no matter how much it costs, it will look ugly.

What do you need to clean silver?

Not only jewelry, but also other silver products can be found in the collections of the house. It can be spoons, forks, knives, other utensils, figurines or coins, and even interior items. Often there are products on which silver is only sprayed, and under it there is an object made of another metal. How to clean such silver jewelry and interior items? More carefully so as not to erase the top layer.

When cleaning products with some inserts of precious and semi-precious stones, you should be especially careful. Namely, it is better not to clean products containing:

Cleaning with improvised means

How to clean silver with baking soda and foil? For this method of cleaning silver items at home, you will need:

a pot for filling with water;
baking soda, two glasses;
a quarter cup of salt;
soft cloth;
tooth cheek with soft bristles;
aluminium foil.

Cover the container with foil

The process itself will look like this:

Line the bottom of the pan with aluminum foil, it should completely cover the bottom.
The walls can not be covered with foil, provided that the silver item does not touch them.
Take water in a saucepan. Water should not boil, somewhere around 60-80 degrees. It is enough to pour, just so that it completely covers the product.
Add the baking soda and salt mixture, mixing thoroughly.
Leave the product to be cleaned in the solution for 5-10 minutes.
After this time, remove the product and remove the remaining plaque and dirt with a toothbrush.
Rinse the jewelry with cold water and dry with a lint-free cloth.
Your decoration has been cleansed.

A product without stones can be lightened with ammonia or citric acid. To enhance the effect, the solution is heated.

You can wash silverware in potato broth. Just drop the thing in there for a few minutes and get it out. Use wool for wiping and polishing.

How to clean silver with foil and soda?

Lifestyle Lifehacks

Silver, tarnished or covered with a black coating, can easily be restored to purity and brilliance with the help of the simplest materials at hand: soda and foil. Knowing how to clean silver with foil and baking soda can be done in minutes.

Please note that these ingredients are suitable for processing both silverware and jewelry, provided that the jewelry does not contain natural gems.

A prerequisite for cleaning silver with foil is that all objects must touch its surface.

During the reaction, a weak electric current is formed, which helps to cleanse the metal of dirt and silver sulfide, which causes the surface to darken.

Method number 1

Take a small deep bowl and line the entire surface with foil. Place your silver jewelry in this bowl and sprinkle with baking soda to completely coat the powder. Pour boiling water over soda and wait for the reaction to complete. When the soda stops sizzling (after 10 minutes), remove the cleaned jewelry, rinse with clean water and dry.

Method number 2

Pour 500 ml of water into a saucepan and add 2 tablespoons of soda. Wait until it boils and lower a piece of aluminum foil to the bottom of the same container. Turn off the fire. Now dip the silver items into the water and hold them there for about 5 minutes. During this time, the silver sulfide will react with aluminum and the silver will be purified. Carefully remove items from the solution and rinse with cold water. Dry items thoroughly before putting them in the box.

Method number 3

Line the bottom of the container with foil and lay out the silver jewelry in a single layer. Pour them with a mixture of soda and salt (proportion 1: 1) and drip a little dishwashing liquid. Fill the container with boiling water and leave for 10 minutes. Once your silverware is clean, rinse it under running water to remove any remaining cleaning agent and dry it.

Method number 4

Heavily tarnished silver can be cleaned as follows. Cover the pan with foil and lay out the silver so that it lies in one layer and each item is in contact with the foil, but does not touch the parts of the container that are not protected by it. Take baking soda and salt in a ratio of 2:1 and dissolve this mixture in hot but not boiling water. Pour the solution into the saucepan (the water should completely cover the objects) and wait 10 minutes.

Take out the silver items one at a time and scrub them well with a soft bristled toothbrush. Dirt accumulated in hard-to-reach corners will easily flake off the metal. Rinse the cleaned items with clean water and dry with a soft, lint-free cloth.

It is necessary to clean silver by any of the above methods at least once a year, and if necessary, more often. And so that jewelry does not darken and needs to be cleaned less often, store it in a dry place, away from medicines, cosmetics and household chemicals.

Silver cleaning with foil

A woman is a beautiful sex that cannot ignore jewelry. They serve not only as a decoration, but also complement and emphasize elegance. Therefore, in order for jewelry to serve as long as possible and sparkle with cleanliness, it is necessary to monitor them.

This is especially true of silver, since this metal is most susceptible to various factors and you can see how it darkens on the human body. How to properly care for silver items so that they serve and please the eye for many years?

The first silver jewelry and objects appeared in ancient Egypt in the period from the year 500 AD. Silver cannot be found in nature in its pure form, despite this, it was valued in antiquity. He was credited with symbolic, healing and even magical properties.

Now in the age of technology, silver is mainly used in jewelry. From it, craftsmen make both simple and original jewelry. You can also meet interior items, cutlery.

Despite the beauty, silver can lose its original beauty over time. The metal darkens, but sometimes a green or blue coating may appear on the item. How to clean silver so that it acquires beauty and charm? Can this be done at home? To understand this, first you need to understand why silver darkens?

Why does silver darken?

Silver is a type of metal that tends to tarnish, darken, and this may be due to time.

Reasons for blackening silver:

high humidity;
sulfur, which is contained in cosmetics;
features of human sweat.

Many have noticed more than once how silver turned black on the human body or in humid air. The metal is resistant to acids and alkalis, but not to hydrogen sulfide.

Silver cleaning with foil

Soda is considered the simplest and most effective way to clean silver from black plaque.. To prepare the product, you will need 500 ml of water and 2 tsp. soda. Mix well, put the liquid on fire, bring to a boil. Pour the solution into a container, on one of which put the foil. Dip the product in the liquid. Hold the silver for a few minutes and again you can see how the silver becomes sparkling and clean.

You can clean silver cutlery with baking soda. To do this, put all the devices in a bowl, on the bottom of which put the foil. Cover appliances with soda, you will need about 3 tbsp. l. soda. Pour hot water over everything, but not boiling water. Leave for a quarter of an hour, then rinse each device under running water. This is the easiest and most effective way to clean cutlery at home.
You need a container with a wide bottom. Wrap the container with foil, put silver in one layer. Sprinkle salt, soda on top, add a few drops of liquid soap. Cover the cutlery with foil and pour boiling water over. Leave for 15 minutes.
Potato broth and foil will help clean silver. Everyone prepares mashed potatoes, and the liquid in which the vegetable was boiled is drained. Should not be doing that. Drain the broth into a container, put a piece of foil and lower the silver item. Get the jewel in five minutes. At first glance, this method seems simple, but effective and simple.

Other folk recipes for cleaning silver

Let's prepare another remedy based on soda. You will need a container (preferably aluminum) into which to pour water, about a glass. Add 0.5 tsp to water. salt, ¼ tsp. soda and 0.5 tsp. detergent.

Put the liquid on fire. As soon as it boils, put the silver item into the water. Boil 30 minutes.

Cleansing with citric acid. To prepare the solution, you will need a glass of water and 50 grams of citric acid. acidic liquid is poured into an enameled container and placed in a water bath.

Place the products in liquid and boil for 15 minutes, check the degree of cleaning all the time.

Vinegar will help rid silver of black spots. For cleaning, you will need table vinegar (as for preservation), which is poured into an enameled bowl. Vinegar is recommended to be heated over low heat, jewelry should be lowered into a warm liquid.

The duration of the remedy is 15 minutes. Remove the silver, rinse with water and wipe dry with a cotton cloth.

Ammonia. Dip the product in 10% alcohol for a quarter of an hour. Then rinse with water and dry. Please note that if the product is with stones, then there should be five drops of ammonia in a glass of water.
Try cleaning with Coke. Pour a small amount of drink into a ladle, put on fire. Put the product in boiling water. Withstand five minutes, this method will get rid of darkening.

Mechanical cleaning of silver

To clean silver items, you can use a solution based on toothpowder. To prepare the solution, you will need tooth powder and soda in equal proportions, add ammonia so that you get a mushy mixture. It is applied from the product with a toothbrush, rinse off with cool water.
A stationery eraser will cope with black on silver. Take the jewelry and slowly, slowly, gently rub the silver with an eraser. This method will give the product a shine. The method is suitable for rings. It will be impossible to clear the circuit.

Cleaning silver jewelry with stones

How to care for silver?

Like all jewelry - silver is no exception, it can lose its luster. To prevent this from happening, he needs constant care.

For cleaning, use a soft cloth and non-aggressive products.

You can remove dark deposits from the surface of the product using ordinary soapy water or a napkin soaked in ammonia. After any cleaning, be sure to rinse the product with water and dry.

Remember that there are several types of silver, some jewelry with a decorative coating that is not cleaned.

How to wear silver?

To avoid having to clean your jewelry, start wearing it correctly.

Wearing silver jewelry is a must. The longer you wear it, the better the metal looks.
It is necessary to remove jewelry before using medicines and especially ointments.
When wearing silver metal, it is worth refusing to use cosmetics that contain sulfur. The metal may darken.
When doing homework, be sure to remove your favorite decoration. Since it is more likely to damage it.

How to clean darkened and tarnished silver

Silver jewelry is beautiful and stylish, but not when they have darkened. This happens often, but, fortunately, you can clean silver yourself.

General rules

In order for cleaning to get rid of all the stains and not scratch the product, follow a few rules:

Wash silver items every 2-3 weeks.
Do not use abrasive products for cleaning.
Use only soft toothbrushes with natural bristles.
Wipe the silver with a soft cloth.
Rinse your silver thoroughly after cleaning products.
Dry silver items on a paper or cloth napkin with a hair dryer.
Polish items with suede or wool.
Do not wear jewelry for 3-4 days after plaque removal.
To avoid corrosion, strictly observe the concentration of the solution and the time of its exposure.

House cleaning methods

Not only professional cleaning in jewelry stores can eliminate dirt on silver products. You can whiten silver using our recipes.

With foil

This method will take you no more than five minutes. Wrap the inside of the bowl in foil. Place decorations and cutlery in the bottom of the bowl. Sprinkle generously with baking soda. Pour boiling water over jewelry. Wait until the chemical reaction is over and the soda stops fizzing. Remove jewelry, rinse them under running water. They shine again.

Another method using foil involves the use of vinegar. You will need half a glass of water and half a glass of table vinegar. Mix them and pour the decorations, after putting them on the foil and falling asleep with salt and soda. After a few minutes, take out the already clean products.

With chalk

Grind the chalk. Make a silver cleaning paste by mixing chalk with ammonia. Instead of ammonia, you can use ammonia or soapy water. Scrub the silver with the resulting paste using a natural bristle toothbrush. Rinse it with water. If you don't want to mix ground chalk with the liquid, rub the silver with chalk powder and let sit for 7-10 minutes. Be careful: you can scratch the metal.

ammonia and hydrogen peroxide

Ammonia

The cleaning solution is prepared simply: dilute ammonia in water 1:10. Dip metal objects into the solution and leave them for several hours. Remove items and dry them.

soap solution

The easiest way to remove dirt is to hold the metal in a soapy solution for several hours. Use hand soap, dish soap, or laundry soap. Soap solution and a toothbrush remove only fresh dirt.

Citric acid and copper wire

This method is only suitable for removing plaque from rings and chains. Pour half a liter of water into a small saucepan. Dissolve 100 grams of citric acid in it. Place the saucepan in a water bath. Put the ring on the wire, wrap the chains around it. Boil the solution until the contaminants disappear.

Vinegar

Pour enough vinegar into the pan so that it covers all the products. Heat the table vinegar a little, without bringing it to a boil. Cool the vinegar, remove the metal from it. Rinse items thoroughly under running water.

Toothpaste or powder

Paste or powder is an abrasive, so it is better to clean coasters, glasses and other objects with a large thickness of silver with them. Gently rub the toothpaste with a brush over the surface of the silver. This will save him from flying. Rinse off the paste and dry the products.

Potato

Olive oil

If you are afraid of damaging the metal, use olive oil. It is safe for silver, but will only cope with a slight coating. Pour some olive oil onto a soft cloth and wipe the jewelry. Wash them under running water and dry them with a hair dryer.

Egg yolk

The yolk rids the surface of oxides that cause darkening. After processing with yolk, you will forget about plaque for a long time. Rub the products with yolk and let it dry. Wash off the dried yolk. The product will shine.

Coca Cola

Coca-Cola will remove green spots, tarnishes and other impurities from silver in a few minutes. Pour half a liter of carbonated drink into the pan, lower the decorations and cutlery into it. Boil them in sparkling water for 5-7 minutes. Do not remove the products immediately, let the contents of the pan cool down. Rinse the silver after removing.

curdled milk

Detergents

Dilute a little dishwashing detergent in water. Mix well, the product should be completely dissolved. Immerse jewelry and interior items in the solution for 5-7 minutes. Clean them with a toothbrush or soft sponge. Remember to thoroughly rinse the silver under running water.

Detergent for glasses and mirrors will clean silver from blackness. Spray it on a cloth and wipe thoroughly. Rinse well.

cigarette ash

Boil the precious metal in water with the addition of cigarette ash. For the best effect, add citric acid to the water.

Cosmetic powder

Powder will help only in case of fresh pollution. Apply it to a cotton pad or sponge and wipe the products. Rinse them well with cool water.

Photo: AndreyPopov/depositphotos.com

Silver jewelry is beautiful and stylish, but not when they have darkened. This happens often, but, fortunately, you can clean silver yourself.

General rules

In order for cleaning to get rid of all the stains and not scratch the product, follow a few rules:

Wash silver items every 2-3 weeks.
Do not use abrasive products for cleaning.
Use only soft toothbrushes with natural bristles.
Wipe the silver with a soft cloth.
Rinse your silver thoroughly after cleaning products.
Dry silver items on a paper or cloth napkin with a hair dryer.
Polish items with suede or wool.
Do not wear jewelry for 3-4 days after plaque removal.
To avoid corrosion, strictly observe the concentration of the solution and the time of its exposure.

House cleaning methods

Not only professional cleaning in jewelry stores can eliminate dirt on silver products. You can whiten silver using our recipes.

With foil

The third method using foil will take you a little longer, but will even rid the silver of old stains. Sprinkle it with wet baking soda and wrap it in a foil envelope. Boil the envelope for 10-15 minutes. Sue it, remove the jewelry, rinse and dry.

With chalk

ammonia and hydrogen peroxide

For this recipe, you will need a liter of water, two tablespoons of hydrogen peroxide and the same amount of ammonia. Mix all the ingredients and dip the metal into the liquid. After 15-20 minutes, remove it, wipe it with a dry cloth. Dishwashing liquid will replace the peroxide.

Ammonia

The cleaning solution is prepared simply: dilute ammonia in water 1:10. Dip metal objects into the solution and leave them for several hours. Remove items and dry them.

soap solution

The easiest way to remove dirt is to hold the metal in a soapy solution for several hours. Use hand soap, dish soap, or laundry soap. Soap solution and a toothbrush remove only fresh dirt.

Citric acid and copper wire

Vinegar

Toothpaste or powder

Potato

You can clean silver with both potato broth and raw potatoes. In the first case, lower the precious metal objects into the decoction for several hours. Remove them, rinse well, polish with a rag. The second way is more laborious. Grate one medium-sized potato on a fine grater, pour the resulting slurry with water. Strain the mixture after 10-15 minutes. Dip the product in the liquid for 20-30 minutes, remove it and polish it.

Olive oil

Beer

Dip the metal in the beer for 30-40 minutes. After removing, clean the silver with chamois. The raid will go away without difficulty.

Egg yolk

Coca Cola

Salt

For this method, you will need water, salt and some foil. Dilute 5 teaspoons of salt in a liter of water. Put the salted water to boil. At the moment of boiling, dip a few small pieces of foil and objects that you need to clean into the water. Remove them after 15-20 minutes.

Soda

Dilute 2 tablespoons of baking soda in 500 ml of water. Put the water on the fire, after boiling, throw some food foil into it. Dip the products in water for 15-20 seconds. They will shine like new.

curdled milk

Lactic acid will rid silver of blackness. Dip it in curdled milk for 20-25 minutes, then rinse with warm water. Polish dry products with a cloth.

Detergents

Detergent for glasses and mirrors will clean silver from blackness. Spray it on a cloth and wipe thoroughly. Rinse well.

cigarette ash

Boil the precious metal in water with the addition of cigarette ash. For the best effect, add citric acid to the water.

Cosmetic powder

Powder will help only in case of fresh pollution. Apply it to a cotton pad or sponge and wipe the products. Rinse them well with cool water.

What do you like more, silver or gold?

Poll Options are limited because JavaScript is disabled in your browser.

Eraser

The eraser will perfectly cope with the plaque. Choose soft rubber bands so that there is no strong abrasive effect. Wipe off plaque, wash off its remnants with water.

With the help of special cosmetics

A special silver cleaner can be in the form of a liquid, spray, cream or wipes soaked in a solution. Some cosmetics contain harsh chemicals. They are harmful to human health with prolonged contact with them and can corrode silver if they are overexposed or not washed off completely. Read the ingredients carefully when choosing a product. Liquid is good for small items, and cream is best used for large ones. Apply the product to a special soft cloth and clean the items. Rinse them well under running water.

High-quality ultrasonic cleaning

An ultrasonic bath will help remove contaminants of any origin. Pour the cleaning liquid into the bath up to the level of the indicator. Do not use flammable liquids or bleaches as they may damage the tub. Immerse the silver in the bath, turn it on. After 5-7 minutes, remove it and rinse well with water.

How to clean darkened silver in a jewelry workshop

In the jewelry workshop, the metal is cleaned in an ultrasonic bath. The service costs from 50 to 200 rubles, depending on the size of the products. Emerald jewelry should not be ultrasonically cleaned, as this stone is fragile and can break. Poorly fixed stones can fly out, so you can notice them in advance and insert them immediately in the workshop. Professional cleaning will restore the brightness of any product.

How to choose a cleaning method

The choice of cleaning method depends on several factors:

product sample;
other metals, if it is an alloy;
the size;
degree of pollution;
the presence of precious stones / gilding / enamel.

For products with stones

Try to avoid strong contamination on products with stones and wash them in soapy water once a month. If you do not have the opportunity to do professional cleaning or use special tools, prepare a solution. Dilute a few drops of ammonia with water and laundry soap, soak a cotton swab with the solution and wipe the jewelry. Try not to touch the stone. Light dirt can be removed with alcohol or cologne. If the product is with pearls, rinse it in a saline solution.

For gilded silver

Do not use brushes or rough cloths to remove dirt from gilded silver. Soak the products in a soapy solution, a solution of ammonia (two tablespoons per half liter of water) or vinegar (in the same proportions). After soaking for half an hour, rinse the gilded silver and rub with suede.

For enamel products

You can clean such jewelry either with a mild soap solution or with a mixture of toothpaste and ammonia. Do not rub the jewelry too hard to avoid cracking.

For blackened silver

Silver with blackening does not need to be brushed or polished with a rag, along with plaque, you risk removing the decorative coating. Dissolve a few grams of soap, one teaspoon of baking soda and two glasses of water. Soak the silver in the solution for 30-40 minutes. Dry it naturally. Another blackened silver solution can be made from water and raw potatoes. Grate 1-2 raw potatoes on a fine grater and pour them with a liter of water. Leave the rings, chains or earrings in the solution for 3-4 hours. Dry your jewelry.

For matte silver

For matte silver, a soap solution is suitable. Soak silver in it, rinse and wipe with a soft cloth (suede is best).

Cleaning silverware and cutlery

Any folk method is suitable for silver dishes. The most economical of these will be boiling cutlery and dishes in a soda solution. Dissolve 4 tablespoons in a liter of water, bring the solution to a boil. Throw a few pieces of foil and cutlery into the pot and boil them for 20-30 minutes. Remove the utensils, rinse under running water and dry them.

How to restore shine to dull jewelry after cleaning

Best of all, the chemical composition for polishing will cope with this task. In addition to them, Goya paste or aluminum will help restore shine. Rub the silver with Goy paste and polish with a woolen or suede cloth. For the second method, you will need pieces of aluminum (or a spoon), baking soda and boiling water. Place decorations, aluminum and a couple of teaspoons of baking soda in a container. Pour boiling water over everything and leave for half an hour. Jewelry will shine like the day you bought it.

Why does silver darken

Rhodium-plated silver is less exposed to external influences, so it practically does not darken. As for ordinary silver, there are several factors responsible for the formation of blackness:

high humidity;
interaction with sweaty or damp skin;
contact with cosmetics, household chemicals, rubber;
low quality silver;
non-compliance with storage rules.

What to do so that silver does not darken

There are several rules by which silver will not darken:

Remove all jewelry or wear rubber gloves before cleaning or applying cream.
Do not allow jewelry to come into contact with water.
Do not spray perfume on places where silver is worn.
Store jewelry in foil in a dry, dark place.

How not to ruin silver jewelry

Follow the rules for cleaning and storing silver so as not to spoil it. Always remove jewelry before physical work and at night.

How to properly store silver

Store silver separately from other metals and jewelry in a dry, dark, cool place. The box should be made of soft materials. It is best to store silver by wrapping it in foil.

Talk 0

Is it possible to clean silver with baking soda and foil

Baking soda is an excellent absorbent that, when used properly, can restore lost luster to silver. And together with the foil, it causes a combined chemical reaction that reverses the oxidative process.

Advantages and disadvantages of this method

Unlike mechanical removal of dirt with polishes, which remove part of the precious metal along with plaque, cleaning with soda and foil has practically no drawbacks. The aluminum contained in the foil attracts the sulfur atoms, converting the Ag25 back into silver.

This cleaning method is suitable for openwork jewelry and twisted chains, because it allows you to remove plaque even in hard-to-reach places.

There is only one drawback - the subject may become cloudy.

Which samples will withstand such processing

Expert opinion

Vsevolod Kozlovsky

6 years in jewelry business. Knows everything about samples and can identify a fake in 12 seconds

The lower the sample of silver, the more it is prone to blackening. Pure silver is not prone to oxidation, which means that it does not need cleaning with soda and foil at all. Therefore, the method will be effective for 800, 830, 875 hallmarks. Rarely required for 925 and 960.

You should never clean gilded or blackened silver with this method, since along with unwanted contaminants, you can remove the decorative coating and the oxide layer..

How not to clean silver

Silver should not be treated with aggressive detergents, as instead of restoring shine, the opposite effect will occur.

Oxidized products and jewelry with pearls.

The use of hard brushes and sponges will scratch the coating, because silver is very sensitive to mechanical stress.

How to clean silver with baking soda and foil at home

This method of cleaning silver is the most gentle and affordable, since almost every home has a package of soda and foil for baking. And even if not, they can be purchased at the nearest mass market.

The full process, including boiling water, preparing and waiting for the result, will take no more than 10 minutes.

Precautionary measures

Some people advise cleaning jewelry in boiling water along with baking soda and foil, but this is not necessary, because pieces of material can peel off and damage the jewelry.

If objects with stones or pearls require purification, then this method should be abandoned so as not to spoil their appearance.

Cleaning Solution Recipes

For 1 liter of hot water you need 50 gr. soda. You can dissolve the powder in an already heated liquid, stirring thoroughly, or add it before boiling. No more additional components are required.

Solution preparation

The reaction is faster when the solution is warm, and even better - boiling water.

You need to act according to the following scheme:

add sodium bicarbonate to water and mix thoroughly;
lay foil in the prepared container at the bottom;
lay out the decoration;
pour the resulting mixture;
wait 3-5 minutes;
take out the product and rinse under water;
polish.

You can also use another method:

cover the bottom with foil;
put decoration;
fill with the required amount of soda;
to fill with water.

If not all blackening has been removed, the procedure can be repeated until the desired result is obtained.

Preparing jewelry for cleaning

Before processing, it is necessary to wipe the product from dust and rinse under warm water.

cleaning process

The reaction between Ag25 and aluminum occurs only when they come into contact. Therefore, covering the surface of the bowl with foil, you need to lay out a blackened object on it. Only then soda is added and everything is poured with boiling water (or a ready-made soda solution).

The compound transfers the sulfur from the silver to the aluminum, so the Ag25 can attach to the foil or be converted into small flakes. Since a slight electrical charge is formed between the connected components, the reaction begins to hiss and foam rises. Therefore, the best place for the procedure will be the sink.

If the product is cloudy, you should use a soft fleece cloth and remove the sediment.

How to return shine to silver in 3 minutes, see the video:

Other cleaning methods

Soda solution can be used not only with foil.

For 0.5 liters of hot water and 2 tbsp. l. soda can be added:

100 ml 6% vinegar and 2 tsp. salt (leave for 10 minutes, rinse and wipe);
1 tsp salt (leave for 3-5 minutes, then rinse and wipe);
2 tbsp. l. ammonia (dip in the composition for 15 minutes, wash, wipe);
ammonia and tooth powder in a ratio of 5:2:2 (apply with a soft brush, remove blackening, rinse and wipe).

If there was neither soda nor foil at home, but there is citric acid, then you can use it to clean silver:

dissolve in 0.5 ml of water 100 gr. substances;
put on fire and bring to a boil;
soak the decoration in a water bath for 15-30 minutes;
rinse and dry thoroughly.

For silver without impurities, the following recipe is suitable:

mix ammonia and 3% hydrogen peroxide in equal proportions;
add 1 tsp. soda;
mix;
lower jewelry for 15-20 minutes;
cutlery - for 60 minutes.

In addition to improvised means, you can purchase special chemicals designed to clean silver.

How to clean stone jewelry

They absolutely do not tolerate cleaning with soda and foil products containing:

pearl;
amber;
ivory;
corals.

It is best to entrust such jewelry to the masters, since these elements are sensitive to any impact.

An additional way to clean silver with precious and semiprecious stones from contamination is soaking in soapy water for an hour, followed by brushing with a toothbrush. Be sure to polish with a soft cloth at the end.

Rules for the care and storage of silver products

It is necessary as blackening or at least once a year.

At the same time, jewelry must be stored in a dry place, away from medicines, cosmetics, perfumes and household chemicals. It is good if these are special cases or jewelry boxes. And storage in foil can protect silver from moisture, mechanical damage, and oxidation.

Before cleaning, washing dishes, taking a bath and using face and body creams, jewelry must be removed.

Silver items that are rarely used, so they need to be cleaned every two months.

Conclusion

I hope the article was useful, now cleaning silver at home is not difficult. Subscribe to the news of the site, leave comments, go to pages on social networks. Every week we have new useful information. Best regards and see you soon!