How to make a frog out of plastic bottles. Do-it-yourself frog from a plastic bottle. Frogs can be different

The Internet portal has a huge selection of photographs illustrating step-by-step instructions for making frog crafts.

What can you make a frog out of?

The materials that can be used to make frog crafts are so diverse that everyone can realize their wildest fantasies. This is a fabric base, plastic products, CDs and the most popular material is paper.

Beautiful do-it-yourself frogs

In order for your frog to turn out beautiful and neat, you need to carefully study the step-by-step instructions for making it. One wrong fold, one uneven cut and the whole craft will turn out to be clumsy and inconspicuous. Detail to detail, smooth folds, precise lines - and your frog is ready!

Many non-standard solutions and ideas from experienced craftswomen can be found at the link: https://podelkisamodelki.ru

Method number 1. Frog - jumper

To make a do-it-yourself frog craft at home, we need white or colored paper. This material is the most used, practical and in demand. Any will do, but our frog made of thicker paper will be stronger.

The usual format of any sheet is a rectangle, but we need a square sheet. To get a square, we just need to bend the paper in the shape of a triangle diagonally. We cut off the remaining, unnecessary part of the sheet.

We already have one diagonal fold, now we do the same on the other side of the sheet. We first add two corners that are nearby, then we also do it with opposite corners of the workpiece. We bend the intermediate sides of the resulting figure inward from two sides. You should get a folding double-sided triangle.

We bend two corners at the base of the upper triangle to its top. We bend the bent corners again in the same direction.

We bend the corners remaining after our manipulations away from each other to the edges of the workpiece and let them over small triangles. We have the frog head almost ready. The resulting small triangles will serve as the eyes of our frog. You can glue circles of white paper on them or draw eyes with a black pen.

We turn our workpiece over and bend it in half. We make the following creases in the opposite direction from the top to the bottom. As in the formation of the frog's head, once again we bend the paper to the outside. So we get the legs of our future jumper.

We fold our entire craft in half and again bend a small segment in the other direction. We fix our folds with a heavy object so that the shape is preserved.

Our frog is ready. If you wish, you can color it or cut out appliqués and stick it directly on the figurine.

It’s easier and faster to make crafts using paper frog folding patterns, which will show you step by step all the steps for making it.

Method number 2. Funny frog

We present a master class on making colored paper frog crafts for kids who still find it difficult to master the origami technique.

To make this work we need:

glue (liquid or pencil);
scissors;
colored pens (gel-based);
ruler;
colored paper (green);
squared paper;
simple pencil;
some white paper;

Let's get to work

First of all, we need to prepare a pattern for the body and head of the frog. The size of our pattern is 7 * 14 cm. We cut out two small circles for the eyes 2 * 1.5 cm in size. We also cut out the front and back paws for crafts.

We begin to cut out the main details on the pattern. For this we use green paper. We need one body, one head, two pairs of eyes.

We cut out one pair of larger eyes from green paper, and a pair of smaller eyes from white paper.

From two rectangular pieces of green paper, we fold and glue two cylinders of the same size with glue. This is our body and head. These parts are also glued together. Draw a smiling mouth on the head with a red pen.

Glue small circles of white paper onto large circles of green paper. In white circles, draw the pupils with a black pen. These are the eyes of our frog. We plant them with glue on the head.

Simple paper frog

This craft option is the easiest and most affordable for young preschool children.

We will need green, white, red and black paper. We also need a sheet of paper of any light shade for the base, on which we will glue our frog and glue.

Cut out a round piece from green paper using a regular medium-sized tea mug. Then, cut out four circles: two larger white and two smaller black. And last we cut out a narrow, not long strip of red paper for the frog's tongue.

We glue black circles on white circles - we get eyes. Next, on the sheet - the base we place a circle of green color and glue the eyes on it. It turned out the head of a frog. We draw her a smile with a black or red pen and glue the tongue twisted at the bottom with a spiral.

Photo crafts frog

Making crafts from plastic bottles is not only exciting, but also extremely useful. So, it gives the used container a second life and partially solves the actual problem of disposal. In addition, products made from bottles are quite durable, resistant to natural influences and allow the imagination to "unfold". Of the minuses - lightness, they can be blown away by the wind, but this problem can be eliminated by simply pouring sand or stones into the craft. We bring to your attention a few ideas for crafts from a plastic bottle in the form of a frog. Such frogs can be “settled” in the garden, on flower beds and lawns as decoration, and also used at home as a container for storing various small things.

How to make a frog container from a plastic bottle?

To make a frog, we need:

two green plastic bottles of 1.5-2 liters;
scissors or stationery knife;
one-piece red zipper;
stationery transparent glue;
white thick paper or paper tape;
black marker.

Progress:

Craft from a plastic bottle frog

A child can help you make this frog, who will surely be fascinated by the unusual process of turning an ordinary object into a funny toy.

You will need:

two green plastic bottles;
acrylic paint in black and green;
glue;
scissors;
colored cardboard.

Progress:

Frog princess from a plastic bottle

Similarly, you can make a fabulous frog princess from a plastic bottle by adding a few specific details to it.

Good afternoon, dear friends, today we will learn how to make cute frogs from plastic bottles, which will definitely take their rightful place in your garden. Plus, they are very quick and easy to make.
Garden figurines are expensive, not everyone has the opportunity to buy them, and many fun and interesting crafts for the garden can be made from hand-made materials. Crafts made from plastic bottles will decorate your yard or garden for a very long time.
We have already collected a large collection of various interesting crafts for the garden on our website, from which you are sure to pick up something for yourself. And now we will learn how to make a frog from a plastic bottle. Also be sure to check out other works by this author.

Frog from plastic bottles for the garden

For the manufacture of one frog, we need two two-liter bottles, preferably figuratively even. We cut out two bottoms from plastic bottles and glue them together. You can glue with a hot gun, but the gun will require care. Be careful not to overheat the glue, because the plastic of the bottle from overheated glue will melt or warp. Or you can glue it with glue "Moment", "Titan", "Dragon", etc.. Beforehand, you need to put a little gravel or any other pebbles inside. This is so that subsequently the frogs do not fly around the garden during the wind. Then, from the remaining even middle part of the bottles, we cut out the paws according to an approximate template. On the paws, it is imperative to leave small, as it were, “flags”, with which they will then be connected to the body, and cut a small gap in the body to fit the size of these so-called “flags”. You can avoid this procedure and just glue the paws over the body, but ... the fastening will be noticeable ...
When the blanks for the frogs are ready, we start painting. Elena painted with automotive paint in spray cans, it is much more resistant, does not fade, does not peel off, although it is somewhat no more expensive than ordinary enamel. Elena, in particular, has frogs for 4 seasons!!! They look great!!! When painted, draw a muzzle. Then ... let's make a crown for the frog girl. From the top of the same bottle. We twist the ends of the crown on scissors, like a ribbon. We paint in golden color. We fix it with pistol glue or whatever you have, but we monitor the heating of the glue. Or take glue "Moment", "Titan" or some other.

We cut out a cap for a boy from the bottom of any yogurt cup about 0.4 or 0.5 liters. or a disposable cup of 0.5 liters. We paint in any bright color. We fasten it like a crown ... awry ... Everything, funny, beautiful, funny frogs from plastic bottles are ready, it remains to find a good place for them in the garden. If you have a pond, reservoir, dry stream, etc. it is better to settle our frogs near it.

A small master class on making plastic frogs will show us Eugene. First, we select a suitable bottle, Evgenia used a shampoo bottle. Now we will draw contours on it by eye, you can do this with a helium pen. Next, we cut out what we drew. The plastic shampoo bottle is dense, so the edges of the cut blank are rough and uneven. Using sandpaper or a nail file, we process well all the edges of our frog.

From the remnants of a plastic bottle, cut out the legs of a frog.

We glue the finished, processed paws to the base of the frog.

Let's make fingers for our paws. Take a green self-adhesive film and draw circles of the desired size on the reverse side. For one "finger" we need two circles.

Cut out our circles.

Glue them to the paws on one side and the other.

If you want your frog to be stable, then fill it with plaster. And when dry, cover with nail polish.

We make eyes, a mouth and a nose from a self-adhesive film. All the frog from a plastic bottle is ready.

Frogs from plastic jars

Natalya Plisko also made funny and funny frogs for herself, now we will find out how she made them.

From these materials we will make funny frogs.

Natalya made this frog from a plastic jar of cream. I also found a suitable green plastic bottle from a shampoo bottle), cut out hips and frog legs from it. I fixed the finished thighs on the sides, and glued the paws to the bottom of the jar.
Now we will make a crown for our frog, take a yellow plastic bottle and make a crown from the neck, and cut an arrow from the middle. We cut out the tongue and mouth from red plastic, Natalya used a jar of yogurt.
All the frog from plastic bottles is ready, you can use it to store any little things.

Frog from a plastic jar

This beauty is also made from a plastic jar of shampoo according to MK from Evgenia, you can store cotton swabs in it, for example.
We take a suitable green bottle and cut a blank out of it. Glue or draw eyes, nose and mouth to the finished workpiece. Cut out paws from the remnants of the bottle and glue them in the right place. Another frog is ready.
If we make double-sided tape at the bottom, but the finished frog can be glued, for example, to the sink or near the sink. Put in it the necessary and necessary things. such as toothbrush, cotton buds, shaving machine, etc.

This frog can be perfect for storing any items, various knick-knacks.

To make a frog you will need:
* Plastic bottles of the same shape.
* Sharp knife and scissors.
* Lock.
* Marker.
* Needle with thread.
* Traffic jams.
* Brush and acrylic paints in green.
* Glue.
* Finished eyes, the right size.
* Roulette.

How to make a frog from a plastic bottle:
Making a frog out of a storage bottle couldn't be easier. Look at the photos, they show the manufacturing process. We measure the bottle with a tape measure, then we measure the lock and, if there is too much, we cut it off. We put a zipper on the bottle and sew it to it. Sew on both sides at the edge of the bottle.
now we will make eyes, it is possible from traffic jams and it is possible from a tree. We cut out the eyes of the required size, glue the finished eyes on them and fix them on a plastic bottle.

Another plastic frog

And one more idea of creating a frog from plastic bottles. It is done very simply, cut out the bottoms of plastic bottles and connect them together. To make a jar for storing small items out of a frog, use a zipper. We fasten it to the edge of our blanks.

As you noticed, making a frog from a plastic bottle is not at all difficult, and the result is very good. Do not forget that there are many interesting crafts for the garden on the site, where you can pick up the right idea for yourself. For now, everyone, and we are waiting for interesting ideas from you)))

Figurines and sculptures, including those made by hand, bring a certain amount of originality and comfort to the design of the garden plot. A popular material for making crafts is bottle plastic. It is soft, easy to cut, dye, glue and sew, but at the same time retains its shape for a long time.

Making a frog from plastic bottles with your own hands

Numerous original ideas for the use of plastic bottles are born from a huge amount of this practical and affordable material. You can easily make a variety of crafts from it, including interesting animal figurines, for example, a funny frog. This is one of the easiest plastic molds to make.

It is interesting! In Slavic mythology, the frog is associated with fertility, moisture, and rain. She is considered a talisman that brings good luck and wealth. Therefore, the more green inhabitants there are in your garden, the richer the harvest in the garden will be and the wealth in the house will be stronger.

Necessary materials and tools

To make a plastic frog, you need to prepare the following materials at hand:

two plastic bottles of the same shade and shape;
paints for outdoor works of various colors. Must have green paint.
brushes;
marker and scissors;
glue gun, strong thread with a needle or wire.

The same color of the bottles is needed so that the individual elements of the craft after staining have the same shade.

Stages of making a frog

Let's start creating the frog:

Labels and adhesive residues must be removed from plastic bottles. This is easy to do by soaking the containers in warm water.
We make blanks for the body. To do this, cut off the bottoms of each bottle at a height of at least 10 cm.
By changing the length of the resulting two parts, you can shorten or lengthen the future frog
The remaining parts of the bottles are cut lengthwise and aligned as much as possible.
Preparing a sheet of bottle plastic for cutting paws
With a felt-tip pen, we draw the shape of the rear and then the front frog legs on the resulting plastic sheet and cut out two identical blanks.
It is better to draw the shape of the paws on paper in advance, but if you are an experienced artist, the outlines can be immediately applied to a plastic bottle with a marker or felt-tip pen
We connect the paws to the body with glue, wire or thread.
We sew the back parts to the upper half of the body, and the front parts to the lower half.
We insert the bottoms into each other so that the torso is obtained. Attached with glue for strength.
We paint the finished craft in two layers.
Coloring in two layers does not allow the frog to shine through in the sun

Do not forget to place weighting material inside the body: pebbles or a few handfuls of dry sand. This is necessary so that in open space the craft is not blown away by the wind.

decoration

After decorating, the appearance of the frog will take on a finished look. An additional coating of crafts with facade varnish will fix the paint, prevent it from being washed off by rain and discoloring under the influence of sunlight.

Frogs can be different

Frogs that will find their place in your country house can be done in other ways:

on a plastic bottle, the contours of the future frog are drawn with a marker, then the top of the bottle is cut off along the drawn lines. Paws are cut out of the remains of the bottle and glued to the base of the frog. The eyes, mouth, and nose of the frog can be drawn on with a marker or cut out from self-adhesive tape in a suitable color. In such a stand, you can store small items and inventory, and if the container is large enough, then use it for planting flowers or other greenery;
To make the craft stable, you can pour a little gypsum on the bottom
if the two bottoms of plastic bottles are not glued together, but connected with a zipper, you get a cute frog-box with an opening mouth, which can also be used to store small things. The zipper is pre-fixed on the workpiece with adhesive tape, and then sewn with neat and even stitches;
You can not paint such a frog, but use green plastic bottles for its manufacture

it’s a little more difficult to make a frog out of plastic containers and polyurethane foam. In this case, the frame is first assembled, foamed, and then the excess foam is cut off. The resulting figure must be given the outline of a frog, and then painted with bright colors.

The finished figure must be covered with furniture clear varnish so that it is resistant to all weather conditions.

Video: we make a frog from plastic bottles with children

Craft in the composition of the garden

After making the figurine, you need to choose a suitable place for it on the site and make an interesting compositional solution:

it’s good if you make more than one frog princess, but pick a pair for her. Frogs are recommended to be placed on a hill, surrounded by greenery;
You can simulate a dry reservoir with the bottoms of plastic bottles, painting them blue
crafts from plastic bottles are not afraid of snow and frost, so they can not be removed for the winter. With their brightness, they will refresh the untouched whiteness of the site.
Dacha owners should not worry about the safety of plastic living creatures, it is unlikely to attract the attention of vandals

In addition to ease of execution, a plastic frog has other advantages: it is durable, practically does not require material costs. A neat craft, made with a sufficient amount of patience and imagination, can be put on public display. Neighbors, fascinated by the perky smile of the frog princess, will definitely come to you for a master class on how to make it.

If you set out to find a use for unnecessary plastic containers, we suggest studying how to make a frog out of a bottle. Unusual will decorate any garden plot in an original way, bring a piece of magic to a playground or a water landscape, like an artificial reservoir. Making such a frog princess is not difficult at all. Any adult can handle it. And not just cope, but also get a lot of pleasure from the process. So, how to make a frog out of a bottle?

How to make a frog out of a bottle: step by step

: DIY materials

To get started, you need to prepare the appropriate materials. The main material for crafts, of course, is a plastic bottle, or rather three: one small one with a capacity of 0.5 liters and two large 2-liter ones with a relief bottom. In addition, we will need thin copper wire, spray paint in three colors (green, bronze and yellow), yellow and black acrylic paint, black alcohol marker and a thin brush. We also need sharp scissors and an awl.

A wonderful assortment for creativity and you probably guessed that for some time we will plunge into childhood and become artists. And if you consider that all adults are children at heart, then this will not be difficult to do.

How to make a frog out of a bottle master class for lovers of creation

The creation of any begins with the manufacture of individual parts. Our frog princess has a body, a head, paws and a crown. Moreover, the head is aligned with the body. For a fairy tale character, this is quite suitable. The work can be divided into four stages: cutting, painting, picking up details and drawing faces. Let's start with cutting.

We take a black marker and large plastic bottles. On one of them, we measure 5 cm from the bottom in the direction from the bottom to the neck and draw a black line around the entire circumference with a marker. On the second bottle we measure 6 cm and also draw a line. Now with scissors you need to carefully cut off the bottom of each bottle along the drawn line. You will get two small containers, one five centimeters high (upper part of the body), and the other six centimeters high (lower part). Of these, we will subsequently assemble the body of a frog.

Now cut out the paws. The front paws are four long spread fingers. The hind legs are the same fingers, only at the top there will be an oblong shape in the form of an elongated egg. Let's make a sketch of the paws with a marker on the remaining upper part of the large bottles and cut them out. In total, we get four paws.

Preparing the crown. We take a small bottle and measure seven centimeters from the neck down. We draw a line. Now, in this interval (7 cm), we draw five cloves with a marker: the base of the cloves will be at the neck, and the point will be near the drawn line. Carefully cut them out, not reaching the neck about one centimeter. The crown for our princess is almost ready.

On this cutting is finished, you can proceed to the second stage - to painting. We cover the legs and body parts with green spray paint. We let them dry. If green acrylic paint is available, it is also suitable for general tinting, as it lays down evenly, without streaks and does not flow. We paint the crown with aerosol bronze or yellow paint and dry accordingly.

When all the components of our frog are painted and dried, we can proceed to the most interesting stage - collecting parts, something like a children's designer for adults.

In the crown, in the center of the cap, twisted around the neck, we make two holes with an awl. We pierce the same holes on the upper part of the body, the one that is 5 cm high. We take a piece of copper wire, thread the ends first into the cap, and then into the body, where we twist the ends tightly, connecting the two parts into one.

Now attach the hind legs to the body. At the top, on the side of the lower body, we pierce two holes on each side. We do the same on the hind legs, approximately in the middle in height. We fasten the legs and torso with copper wire. We scroll the ends of the wire from the inside of the craft. Attach the front legs in the same way, only to the base of the body.

We complete the assembly of the frog by connecting the upper and lower parts into one. To do this, we insert the lower, higher part tightly inside the upper one. So we have formed our fabulous frog. All that's left is to revive her.

How to make a frog idea out of a bottle

And in order to revive our beauty, we will make her a face that looks like a smiley. For this we need a brush, as well as yellow and black acrylic paint. Draw two large oval eyes with yellow paint and shade them. After the paint dries, draw round pupils with black paint and tint. To give the eyes expressiveness, outline them with a black outline. Let's finish our creative process by drawing a smile in the form of an emoticon.

The fairy-tale figurine is ready and can be put on public display. Now you know, how to make a garden frog out of a bottle or vegetable garden. It is possible that this is not your last work of art. The result and the abundance of plastic containers will surely inspire the creation of other fairy-tale characters, animals or flowers. And the nearest neighbors, fascinated by the cheerful smile of the frog, will come to you for a master class.